Farmtronics National Sales and Service Contact Us - 1-800-667-8001

Shop

» Electrical Products » Circuit Protection

 

 
Micro Relay Holder
Product ID: E65410
View Details
 
This micro relay holder is for use with the micro relay A2 terminal configuration. Requires two terminal types: 3 of E65420 and 2 of E65430; therefore, these terminals are sold in packages of 3 and 2.
Price: $5.25
 

 
Micro Relay Holder Terminals, 2/Pack
Product ID: E65430
View Details
 
Micro relay holder terminals. 2/Pack.
Price: $2.25
 

 
Micro Relay Holder Terminals, 3/Pack
Product ID: E65420
View Details
 
Micro relay holder terminals. 3/Pack.
Price: $3.50
 

 
Micro Relay Holder with Wire Leads
Product ID: E65440
View Details
 
This micro relay holder is for use with the micro relay A2 terminal configuration with pre-wired terminals. For added convenience, 8" wire leads are professionally crimped for quick installation.
Price: $11.95
 

 
Micro Relay with Resistor, 12V
Product ID: E65400
View Details

 

12V, SPDT (Single Pole Double Throw) micro relay with resistor. Micro relays fit many vehicles and applications. They have a reduced size, but can accept a 25 amp load. Typical applications include: lamp control, horns, power windows, fuel pumps, fans and lift gates. Has an A2 Terminal configuration.
Price: $8.95
 

Mini Circuit Breakers, Automatic Reset
Mini Circuit Breakers, Automatic Reset
Product ID: ID0030
View Details
 
Type I Automatic Reset. Mini size breakers are designed to fit in place of a mini fuse. Available in amperage ratings of 10, 15, 20 and 25 with a maximum of 14V DC. Must specify amps.
Amps: 10 amps
15 amps
20 amps
25 amps
Price: $3.95
 

Mini Circuit Breakers, Non-Cycling
Mini Circuit Breakers, Non-Cycling
Product ID: ID0031
View Details
 
Type II Non-Cycling. Mini size breakers are designed to fit in place of a mini fuse. Available in amperage ratings of 10, 15, 20 and 25 with a maximum of 14V DC. Must specify amps.
Amps: 10 amps
15 amps
20 amps
25 amps
Price: $3.95
 

Relay, Time Delay with Reset
Relay, Time Delay with Reset
Product ID: E65460
View Details

 

To operate the relay, input voltage is applied continuously. A normally open initiate switch closure (either momentary or maintained) causes the load contact to close energizing the load and start timing. At the end of the preset delay time period, the load is turned OFF. Re-closing the initiate switch during timing causes a new timing period to restart while not affecting the load contact. The load remains energized until there are no timing interrupts, and the preset delay has fully elapsed. The time delay can be fixed or adjustable from 10 to 1,000 seconds.
Price: $129.95
 

« | 1 | 2 | 3 | 4 | 5 | 6 | »