Farmtronics National Sales and Service Contact Us - 1-800-667-8001

Shop

» Electrical Products » Circuit Protection

 

Relay, Time Delay without Reset
Relay, Time Delay without Reset
Product ID: E65450
View Details

 

These relays start the ON delay timing when input power is applied. When the preset time delay has run out, the on-board relay is energized and the load is turned ON. The load will remain ON until the input power is removed. Power must be applied during timing and after time out or as long as necessary to keep the load energized. Momentary loss of power during timing will not cause momentary actuation of the load. The input voltage has to be removed in order to reset. The time delay can be fixed or adjustable from 10 to 1,000 seconds.
Price: $119.95
 

Single Row 10 Stud Terminal Block 40 Amp
Single Row 10 Stud Terminal Block 40 Amp
Product ID: E48630
View Details
 
40 amp rated terminal block has a single row of 10/32 studs with 2 3/16" mounting hole eyelets. 5/8" deep by 1/4" high, 7 5/8" length.
Price: $18.95
 

Single Row 5 Stud Terminal Block 40 Amp
Single Row 5 Stud Terminal Block 40 Amp
Product ID: E48610
View Details
 
40 amp rated terminal block has a single row of 10/32 studs with 2 3/16" mounting hole eyelets. 5/8" deep by 1/4" high, 4 1/2" length.
Price: $11.95
 

Splice Saver Connection System
Splice Saver Connection System
Product ID: ID0036
View Details

 

Splice Saver connectors are capable of providing one or several splices within a single connection assembly. The most common purpose of this system is to eliminate crimped splice (clip and dip) applications. Must specify option.
Option: Splice Saver 1-12
Splice Saver 2-6
Price: $12.95
 

Standard Relay Holder
Standard Relay Holder
Product ID: E65510
View Details
 
The standard relay holder is for use with all relays with an A2 terminal configuration. Made of weather resistant black plastic. Holders may be ganged. Terminals are sold separately in packages of 5.
Price: $3.95
 

Standard Relay Holder Terminals 5/Pack
Standard Relay Holder Terminals 5/Pack
Product ID: E65520
View Details
 
Terminals for the standard relay holder. 5/Pack.
Price: $5.95
 

Standard Relay Holder with Wire Leads
Standard Relay Holder with Wire Leads
Product ID: E65500
View Details
 
The standard relay holder is for use with all relays with an A2 terminal configuration. Made of weather resistant black plastic. Holders may be ganged. Terminals are pre-wired with 8" leads professionally crimped for quick installation. Just slip in a high capacity relay and connect wires to complete your project.
Price: $10.95
 

« | 1 | 2 | 3 | 4 | 5 | 6 | »