New Full-Bin Sensor II
…never climb a bin again!
The New Full-Bin Super Sensor II lets you know precisely when your bin is full. A sensor attached to the auger spout detects when the bin is full and electronically signals the light placed on the auger tubing, or any convenient location for quick visibility. It’s simple, accurate, and safe to use. The sensor and light are encased in a durable, sealed housing for protection from weather, dust and tough usage. It’s foolproof and virtually maintenance free. The super sensor can be installed in less than an hour. It’s the most effective and reliable system available today. It can also be transferred from one size auger to another.
Now One Size Fits All!
Second Generation Features:
1) Constant communication between the control box and sensor
2) Change from mechanical to digital angle detection in the sensor
3) An audible alarm with adjustable volume
4) Longer cable between sensor and control box, can be used up to 125’ auger
The heavy-duty magnetic light can be placed anywhere for convenient visibility. A wiring kit for your air seeder allows you to move the sensor and the light (just unplug each one) from the grain auger and use them on the air seeder. For this application the sensor will be raised and lowered from the bottom of the auger. When the power switch is turned on, the Sensor Status LED will be green anytime the sensor angle is below the full-bin threshold. When the sensor has been tilted past the threshold for more than 3 seconds continuously, the Sensor Status LED will change to red and the audible alarm will sound for 10 seconds. After 10 seconds, the alarm will silence, but the Sensor Status LED will
remain red until the sensor angle returns to below the full-bin threshold. If the contol box losses communication with the sensor at any point, the Sensor Status LED will blink red and the audible alarm will sound every 10 seconds. Shipped complete with wiring harness.
Featured Products
