RiteHeight Sprayer Boom Height Control Kit - 3 Sensors

RH500-ISO Remote Boom Control by Greentronics

Reduce spray drift, improve spray coverage, work faster and safer.

The RiteHeight Sprayer Boom Height Controller keeps the sprayer booms automatically at a consistent height eliminating the need for manual height adjustments in hilly terrain, and minimizing the risk of boom contact with the ground.

The RiteHeight system uses rugged stainless steel sonar sensors mounted near the boom tips to continually monitor and maintain the height of the booms in Ground or Canopy mode providing stable operation even in partial canopy situations. That means more consistent spray height, better spray coverage, and reduced drift. And much less stress and fatigue, especially when spraying at dusk or after dark.

Because the RiteHeight Controller uses the sprayer’s existing electric-over-hydraulic controls, it is easy to install on almost any type of sprayer. Simple electrical connections are made to the solenoid valves that control the boom lift cylinders.

Headland mode is a very convenient method for controlling what the booms do when the machine reaches the headland and prepares to turn around. Many operators want the boom to raise and the outer booms to raise a little higher than the center boom. We now have extra menus where you can pre-configure what you want to happen. Once set up, all the operator has to do is “double-tap” UP for the center boom. The boom will raise to the pre-configured distance. The outer booms can raise a little more than the center depending on how this was configured. During the turn, Headland Mode will prevent the system from making DOWN corrections . This prevents the boom from erratic swings due to centrifugal forces on the boom while turning. After making the turn the operator has to single-tap DOWN on the center boom switch to re-engage AUTO and bring the boom
automatically to the desired target height.

RiteHeight RH500-ISO Offers:

* Easy to install. Just two sensors and simple electrical connections are needed. No hydraulic plumbing required.
* Self calibration. Automatically adjusts to the hydraulic performance of almost any sprayer.
* Easy to use and override. Turn it on, select auto and go. Manual override disengages auto mode immediately.
* Step-by-step menu system. Enter desired spray height and fine-tune other settings easily.
* Back rack control option. Add a third sensor so the RiteHeight system automatically controls back rack spray height.
* Choose up to a 7 Sensor System. To improve performance when spraying on steep hills, over crop canopy, and for sprayers over 120' booms
or wider.

* Adaptable & Reliable. Can be installed on almost any pull type or self-propelled sprayer. Durable components require little maintenance.
* Ability to control proportional valves
* New ECU. Now has a rugged enclosure and replaces previously used junction box.
* New Sensors are rugged and stainless steel and maintain the boom height in Ground or Canopy mode for stable operation even in partial canopy
situations.
* New Choose between imperial and metric units when setting target height.

Sonar Sensors 

Ultrasonic range sensors mounted in sturdy brackets with break-away design are easily attached to sprayer booms.

Controller
Now has the capability to be used with your existing ISOBUS controller or with the TD500 touch screen display, sold separately. Simple controls allow engaging and disengaging automatic mode, as well as adjusting the boom height on the go. The same controls are used to navigate the simple menu system to configure and calibrate the system.
ECU
New rugged enclosure ECU replaces previously used junction box.